|
Replies:
2
-
Last Post:
Apr 19, 2007 9:03 AM
by: dblasin
|
|
|
|
|
|
|
Réf. : Re: R: [sysad
min-discuss] How to get disk parameters?
Posted:
Apr 19, 2007 4:44 AM
|
|
[No Body]
|
|
|
Posts:
72
From:
Registered:
2/15/07
|
|
|
|
Re: Réf. : Re: R: [sysad
min-discuss] How to get disk parameters?
Posted:
Apr 19, 2007 4:44 AM
in response to: Guest
|
|
Hi Jeremy, I installed the latest explorer, but its output shows all the same Serial numbers. Any clues? [root@thumper Setup]$ /opt/SUNWexplo/bin/diskinfo.i386 /dev/rdsk/c3t0d0s2: No such file or directory
AVAILABLE SCSI DEVICES: Location Vendor Product Rev Serial # c0t0d0 ATA HITACHI HDS7250S A20A KRVN03 c0t1d0 ATA HITACHI HDS7250S A20A KRVN03
c0t2d0 ATA HITACHI HDS7250S A20A KRVN03 c0t3d0 ATA HITACHI HDS7250S A20A KRVN03 c0t4d0 ATA HITACHI HDS7250S A20A KRVN03 c0t5d0 ATA HITACHI HDS7250S A20A KRVN03
c0t6d0 ATA HITACHI HDS7250S A20A KRVN03 c0t7d0 ATA HITACHI HDS7250S A20A KRVN03 c1t0d0 ATA HITACHI HDS7250S A20A KRVN03 c1t1d0 ATA HITACHI HDS7250S A20A KRVN03
c1t2d0 ATA HITACHI HDS7250S A20A KRVN03 c1t3d0 ATA HITACHI HDS7250S A20A KRVN03 c1t4d0 ATA HITACHI HDS7250S A20A KRVN03 c1t5d0 ATA HITACHI HDS7250S A20A KRVN03
c1t6d0 ATA HITACHI HDS7250S A20A KRVN03 c1t7d0 ATA HITACHI HDS7250S A20A KRVN03 -Atul On 4/19/07,
jeremy dot mauro at bnpparibas dot com <jeremy dot mauro at bnpparibas dot com> wrote:
There is also a tool in the Sun explorer:
ls -al /opt/SUNWexplo/bin/diskinfo.*
-r-xr-xr-x 1 root
bin 36516 Apr 19 2006 /opt/SUNWexplo/bin/diskinfo.i386
-r-xr-xr-x 1 root
bin 37064 Apr 19 2006 /opt/SUNWexplo/bin/diskinfo.sparc
here is the output:
AVAILABLE SCSI DEVICES:
Location
Vendor Product
Rev Serial #
c0t0d0 TEAC
CD-224E
19A TEAC
<table width="100%">
<tbody><tr valign="top">
<td>Internet
atulvid at gmail dot com
Envoyé par : sysadmin-discuss-bounces at opensolaris dot org
19/04/2007 13:14
</td><td>
<table width="100%">
<tbody><tr>
<td>
Pour
</td><td valign="top">san2rini
</td></tr><tr>
<td>
cc
</td><td valign="top">ug-bosug, opensolaris-discuss,
sysadmin-discuss
</td></tr><tr>
<td>
Objet
</td><td valign="top">Re: R: [sysadmin-discuss]
How to get disk parameters?</td></tr></tbody></table>
<table>
<tbody><tr valign="top">
<td>
</td><td>
</td></tr></tbody></table>
</td></tr></tbody></table>
Hi Alf,
Thanks for the information. But on my thumper box, iostat
is not
showing Serial No:
[root@thumper /]$ iostat -E sd45
sd45 Soft Errors: 37 Hard Errors: 0 Transport Errors:
0
Vendor: ATA Product: HITACHI HDS7250S Revision: A20A
Serial No:
Size: 500.11GB <500107862016 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 37 Predictive Failure Analysis: 0
It is showing the device ID though:
[root@thumper /]$ iostat -Ei sd45
sd45 Soft Errors: 37 Hard Errors: 0 Transport Errors:
0
Vendor: ATA Product: HITACHI HDS7250S Revision: A20A
Device Id:
id1,sd@SATA_____HITACHI_HDS7250S______KRVN03ZAG2JHUD
Size: 500.11GB <500107862016 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 37 Predictive Failure Analysis: 0
How can I be sure that same disk is being used when thumper is booted
in Linux.? On Linux "hdparm -I" will show the serial no.
Regards,
_Atul
On 4/19/07, Alf <san2rini at fastwebnet dot it> wrote:
> iostat -E |grep <diskdrive>
> You'll see the Ser. number next to it!
>
> cheers
>
> >----Messaggio originale----
> >Dal: atulvid at gmail dot com
> >Data: 19/04/2007 6.46
> >A: <opensolaris-discuss at opensolaris dot org>, <
sysadmin-discuss at opensolaris dot org>,
> <ug-bosug at opensolaris dot org>
> >Ogg: [sysadmin-discuss] How to get disk parameters?
> >
> >Hi,
> > I want to get various disk parameters including
disk serial
> >numbers (or disk IDs). How do I do that on thumper with OpenSoalris?
> >Is there any equivalent command for hdparm on Solaris?
> >
> >Regards,
> >_Atul
> >_______________________________________________
> >sysadmin-discuss mailing list
> >sysadmin-discuss at opensolaris dot org
> >http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
> >
>
>
>
>
>
_______________________________________________
sysadmin-discuss mailing list
sysadmin-discuss at opensolaris dot org
http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
<pre>This message and any attachments (the "message") is
intended solely for the addressees and is confidential.
If you receive this message in error, please delete it and
immediately notify the sender. Any use not in accord with
its purpose, any dissemination or disclosure, either whole
or partial, is prohibited except formal approval. The internet
can not guarantee the integrity of this message.
BNP PARIBAS (and its subsidiaries) shall (will) not
therefore be liable for the message if modified.
---------------------------------------------
Ce message et toutes les pieces jointes (ci-apres le
"message") sont etablis a l'intention exclusive de ses
destinataires et sont confidentiels. Si vous recevez ce
message par erreur, merci de le detruire et d'en avertir
immediatement l'expediteur. Toute utilisation de ce
message non conforme a sa destination, toute diffusion
ou toute publication, totale ou partielle, est interdite, sauf
autorisation expresse. L'internet ne permettant pas
d'assurer l'integrite de ce message, BNP PARIBAS (et ses
filiales) decline(nt) toute responsabilite au titre de ce
message, dans l'hypothese ou il aurait ete modifie.
</pre>
|
|
|
|
|
Posts:
27
From:
US
Registered:
7/8/05
|
|
|
|
Re:
Réf. : Re: R: [sysadmin-discuss]
How to get disk parameters?
Posted:
Apr 19, 2007 9:03 AM
in response to: atulvid
|
|
Have you tried "format -e"? Third line on the inquiry on my scsi device
returned the serial number. I'm not sure that ATA works that same way,
but you might want to check. Let me know.
commands to run:
format -e (select the drive)
scsi
inquiry
example:
format> scsi
Warning: these functions are intended for expert use only, for
debugging disk devices and for unusual configuration settings.
It is recommended that you do not use this menu for normal disk
configuration and formatting, unless you have explicit instructions,
or know exactly what you are doing.
SCSI MENU:
p<n> - display a mode sense page
p<n> b<n> <op> [~]<n> - change a byte and issue mode select
b<n> <op> [~]<n> - add an operation to the mode select list
for the current page
where: p<n> specifies the page with page code <n>
b<n> specifies byte <n> of the page
<op> can be one of the following operators:
= (set specified value)
|= (bitwise OR with current value)
&= (bitwise AND with current value)
<n> can be a decimal value in the range 0-255,
or two hexadecimal digits, in the form 0x<xx>.
[~] complements the specified value
apply - apply mode select list
cancel - cancel mode select list
display - display mode select list
all - display all supported mode sense pages
default p<n> - mode select page <n> to default values
default all - mode select all pages to default values
format - format without standard mode selects
inquiry - display device's inquiry response
list - list common SCSI-2 mode pages
!<cmd> - execute <cmd> , then return
quit
scsi> inquiry
Inquiry:
00 00 03 12 8b 00 01 3e 53 45 41 47 41 54 45 20 .......>SEAGATE
53 54 33 31 38 34 30 34 4c 53 55 4e 31 38 47 20 ST318404LSUN18G
34 32 30 37 30 30 33 36 54 31 43 35 43 44 00 00 42070036T1C5CD..
00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 43 6f 70 79 72 69 67 68 74 20 28 63 29 20 32 .Copyright (c) 2
30 30 30 20 53 65 61 67 61 74 65 20 41 6c 6c 20 000 Seagate All
72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20 rights reserved
Vendor: SEAGATE
Product: ST318404LSUN18G
Revision: 4207
Removable media: no
Device type: 0
ISO version: 0
ECMA version: 0
ANSI version: 3
Async event notification: no
Terminate i/o process msg: no
Response data format: 2
Additional length: 139
Relative addressing: no
Dave
Atul Vidwansa wrote:
> Hi Jeremy,
> I installed the latest explorer, but its output shows all the same
> Serial numbers. Any clues?
>
> [root@thumper Setup]$ /opt/SUNWexplo/bin/diskinfo.i386
> /dev/rdsk/c3t0d0s2: No such file or directory
>
> AVAILABLE SCSI DEVICES:
>
> Location Vendor Product Rev Serial #
>
> c0t0d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t1d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t2d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t3d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t4d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t5d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t6d0 ATA HITACHI HDS7250S A20A KRVN03
> c0t7d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t0d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t1d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t2d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t3d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t4d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t5d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t6d0 ATA HITACHI HDS7250S A20A KRVN03
> c1t7d0 ATA HITACHI HDS7250S A20A KRVN03
>
> -Atul
>
> On 4/19/07, * jeremy dot mauro at bnpparibas dot com
> <mailto:jeremy dot mauro at bnpparibas dot com>* <jeremy dot mauro at bnpparibas dot com
> <mailto:jeremy dot mauro at bnpparibas dot com>> wrote:
>
>
> There is also a tool in the Sun explorer:
> ls -al /opt/SUNWexplo/bin/diskinfo.*
> -r-xr-xr-x 1 root bin 36516 Apr 19 2006
> /opt/SUNWexplo/bin/diskinfo.i386
> -r-xr-xr-x 1 root bin 37064 Apr 19 2006
> /opt/SUNWexplo/bin/diskinfo.sparc
>
> here is the output:
> AVAILABLE SCSI DEVICES:
>
> Location Vendor Product Rev Serial #
>
> c0t0d0 TEAC CD-224E 19A TEAC
>
>
>
>
>
>
>
> *Internet*
> *atulvid at gmail dot com <mailto:atulvid at gmail dot com>*
>
> *Envoyé par : sysadmin-discuss-bounces at opensolaris dot org
> <mailto:sysadmin-discuss-bounces at opensolaris dot org>*
>
> 19/04/2007 13:14
>
>
> Pour
> san2rini
> cc
> ug-bosug, opensolaris-discuss, sysadmin-discuss
> Objet
> Re: R: [sysadmin-discuss] How to get disk parameters?
>
>
>
>
>
>
>
>
>
>
> Hi Alf,
> Thanks for the information. But on my thumper box, iostat is not
> showing Serial No:
>
> [root@thumper /]$ iostat -E sd45
> sd45 Soft Errors: 37 Hard Errors: 0 Transport Errors: 0
> Vendor: ATA Product: HITACHI HDS7250S Revision: A20A Serial No:
> Size: 500.11GB <500107862016 bytes>
> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
> Illegal Request: 37 Predictive Failure Analysis: 0
>
> It is showing the device ID though:
>
> [root@thumper /]$ iostat -Ei sd45
> sd45 Soft Errors: 37 Hard Errors: 0 Transport Errors: 0
> Vendor: ATA Product: HITACHI HDS7250S Revision: A20A Device Id:
> id1,sd@SATA_____HITACHI_HDS7250S______KRVN03ZAG2JHUD
> Size: 500.11GB <500107862016 bytes>
> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
> Illegal Request: 37 Predictive Failure Analysis: 0
>
> How can I be sure that same disk is being used when thumper is booted
> in Linux.? On Linux "hdparm -I" will show the serial no.
>
> Regards,
> _Atul
>
> On 4/19/07, Alf <san2rini at fastwebnet dot it
> <mailto:san2rini at fastwebnet dot it>> wrote:
>> iostat -E |grep <diskdrive>
>> You'll see the Ser. number next to it!
>>
>> cheers
>>
>> >----Messaggio originale----
>> >Dal: atulvid at gmail dot com <mailto:atulvid at gmail dot com>
>> >Data: 19/04/2007 6.46
>> >A: <opensolaris-discuss at opensolaris dot org
> <mailto:opensolaris-discuss at opensolaris dot org>>, sysadmin-discuss at opensolaris dot org
> <mailto:sysadmin-discuss at opensolaris dot org>>,
>> <ug-bosug at opensolaris dot org <mailto:ug-bosug at opensolaris dot org>>
>> >Ogg: [sysadmin-discuss] How to get disk parameters?
>> >
>> >Hi,
>> > I want to get various disk parameters including disk serial
>> >numbers (or disk IDs). How do I do that on thumper with OpenSoalris?
>> >Is there any equivalent command for hdparm on Solaris?
>> >
>> >Regards,
>> >_Atul
>> >_______________________________________________
>> >sysadmin-discuss mailing list
>> >sysadmin-discuss at opensolaris dot org
> <mailto:sysadmin-discuss at opensolaris dot org>
>> >http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
>> >
>>
>>
>>
>>
>>
> _______________________________________________
> sysadmin-discuss mailing list
> sysadmin-discuss at opensolaris dot org
> <mailto:sysadmin-discuss at opensolaris dot org>
> http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
>
> This message and any attachments (the "message") is
> intended solely for the addressees and is confidential.
> If you receive this message in error, please delete it and
> immediately notify the sender. Any use not in accord with
>
> its purpose, any dissemination or disclosure, either whole
> or partial, is prohibited except formal approval. The internet
> can not guarantee the integrity of this message.
> BNP PARIBAS (and its subsidiaries) shall (will) not
>
> therefore be liable for the message if modified.
>
> ---------------------------------------------
>
> Ce message et toutes les pieces jointes (ci-apres le
> "message") sont etablis a l'intention exclusive de ses
>
> destinataires et sont confidentiels. Si vous recevez ce
> message par erreur, merci de le detruire et d'en avertir
> immediatement l'expediteur. Toute utilisation de ce
> message non conforme a sa destination, toute diffusion
>
> ou toute publication, totale ou partielle, est interdite, sauf
> autorisation expresse. L'internet ne permettant pas
> d'assurer l'integrite de ce message, BNP PARIBAS (et ses
> filiales) decline(nt) toute responsabilite au titre de ce
>
> message, dans l'hypothese ou il aurait ete modifie.
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> sysadmin-discuss mailing list
> sysadmin-discuss at opensolaris dot org
> http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
_______________________________________________
ug-bosug mailing list
List-Unsubscribe: mailto:ug-bosug-unsubscribe at opensolaris dot org
List-Owner: mailto:ug-bosug-owner at opensolaris dot org
List-Archives: http://www.opensolaris.org/jive/forum.jspa?forumID=54
|
|
|
|
|
